Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 1 vertalen

Stap 1
With the PSP's faceplate removed, position the PSP so that the analogue stick is easily attainable. Gently pull up on the analogue stick. It should just pop off from the rest of the device. In order to clean it correctly, take a cotton swab w/ rubbing alcohol and clean the base of the analogue stick.
  • With the PSP's faceplate removed, position the PSP so that the analogue stick is easily attainable.

  • Gently pull up on the analogue stick. It should just pop off from the rest of the device.

  • In order to clean it correctly, take a cotton swab w/ rubbing alcohol and clean the base of the analogue stick.

  • The connection point on the PSP should be done as well (where the analogue stick meets the PSP).

Con la caratula frontal del PSP removida, posiciona el PSP de manera que la palanca sea facilmente removida.

Gentilmente jala la palanca, deberia de salir facilmente.

Para limpiarla correctamente, toma un isopo y con poco alcohol limpia la base de la palanca.

Igualmete el conector del PSP deberia limpiarse (donde se conecta la palanca)

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.