Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 2
The next two steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. If you aren't using the iSclack, skip down two steps for an alternate method. If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger iPhones like the iPhone 11 Pro Max.
Apply suction cup(s)
  • The next two steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. If you aren't using the iSclack, skip down two steps for an alternate method.

  • If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger iPhones like the iPhone 11 Pro Max.

  • Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.

  • Press both suction cups firmly into place.

  • If your display or back glass is badly cracked, covering it with a layer of clear packing tape may help the suction cups adhere. The iSclack also includes two pieces of tape for this purpose.

I due prossimi passi sono la dimostrazione d'uso dell'iSclack, un attrezzo comodo che raccomandiamo a chiunque effettui spesso riparazioni. Se non usi l'iSclack, salta questi due passi e continua con il metodo alternativo.

Se il regolatore di profondità di plastica è attaccato alla parte centrale dell'iSclack, staccalo ora. Non serve sui telefoni più grandi come l'iPhone X11 Pro Max.

Applica le ventose sul telefono, vicino al bordo inferiore dell'iPhone, una sul pannello frontale e l'altra sul case posteriore.

Premi saldamente sulle ventose per farle attaccare bene.

Se il tuo display o il vetro posteriore è seriamente crepato, coprilo di uno strato di nastro trasparente affinché le ventose possano aderire. L'iSclack include due pezzi di nastro a tal fine.

[title] Apply suction cup(s)
[* icon_note] The next two steps demonstrate the iSclack, a handy tool that we recommend for anyone doing frequent repairs. '''If you aren't using the iSclack, skip down two steps for an alternate method.'''
[* black] If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger iPhones like the iPhone 11 Pro Max.
[* black] Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.
[* black] Press both suction cups firmly into place.
[* icon_note] If your display or back glass is badly cracked, covering[guide|113372|covering it with a layer of clear packing tapetape|new_window=true] may help the suction cups adhere. The iSclack also includes two pieces of tape for this purpose.
[* icon_note] If your display or back glass is badly cracked, covering[guide|113372|covering it with a layer of clear packing tapetape|new_window=true] may help the suction cups adhere. The iSclack also includes two pieces of tape for this purpose.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.