Repareer je spullen Gemeenschap Winkel

Remplacement de la coque arrière d'une Game Boy Advance SP

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Frans
Volgende stap

Stap 1 vertalen

Stap 1
Nintendo Game Boy Advance SP Back Cover Replacement: stap 0, afbeelding 1 van 2 Nintendo Game Boy Advance SP Back Cover Replacement: stap 0, afbeelding 2 van 2

  • Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

  • Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

En vous servant d'un tournevis tri-wing, dévissez les vis qui maintiennent la coque arrière au reste de la console. Les six vis à enlever incluent :

Quatre vis tri-wing #00 de 6,45 mm localisées aux coins de la coque.

Deux vis tri-wing #00 de 4,6 mm localisées au milieu du haut et du bas de la coque.

-[* orange] Using the tri-wing screwdriver, unscrew the screws holding the back cover to the device. The six screws that need to be removed include:
- [* orange] Four #00 6.45mm tri-wing screws that are located at the corners of the device.
- [* yellow] Two #00 4.6mm tri-wing screws that are located at the top-center and bottom-center of the device.
+[* yellow] Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.
+[* green] Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.