Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Slide the circuit board out of its slot. Remove the LEDs by clipping off their connections with a pair of tweezers. Attach the new LEDs by soldering the ends of the LEDS to their corresponding connections on the circuit board.
  • Slide the circuit board out of its slot.

  • Remove the LEDs by clipping off their connections with a pair of tweezers.

  • Attach the new LEDs by soldering the ends of the LEDS to their corresponding connections on the circuit board.

  • Check out our How to Solder and Desolder Connections guide for best practices and soldering tips.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.