Ga door naar hoofdinhoud
Engels
Nederlands

Stap 5 vertalen

Stap 5
With the four screws unscrewed, the UMD Drive can be removed. Gently lift the drive from its housing. Make sure as to not damage the UMD ribbon cable (connecting it to the logic board) as you remove the drive.
  • With the four screws unscrewed, the UMD Drive can be removed. Gently lift the drive from its housing.

  • Make sure as to not damage the UMD ribbon cable (connecting it to the logic board) as you remove the drive.

  • This may be a good time to clean the laser head or any of the components inside the UMD Drive.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.