Ga door naar hoofdinhoud
Engels
Nederlands
Stap 4
With the UMD door off, locate and remove the four 4mm Phillips screws that hold in the UMD Drive in place. If you have not disconnected the UMD ribbon cable, do so now, as to not damage it when removing the drive.
  • With the UMD door off, locate and remove the four 4mm Phillips screws that hold in the UMD Drive in place.

  • If you have not disconnected the UMD ribbon cable, do so now, as to not damage it when removing the drive.

  • If you have not disconnected the UMD ribbon cable do so now, as to not damage it when removing the drive.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.