Ga door naar hoofdinhoud

Nintendo Switch Liteの分解

Stap 4
Nintendo Switch Lite Teardown: stap 0, afbeelding 1 van 3 Nintendo Switch Lite Teardown: stap 0, afbeelding 2 van 3 Nintendo Switch Lite Teardown: stap 0, afbeelding 3 van 3
  • The way is blocked by impassable (tri-point) screws. We can't progress further until we find and acquire the special tool.

  • No distracting side quests today—we're on a mission and we brought all the tools needed to beat the game. Y00 driver, we choose you!

  • Under the back cover, we find: another cover. Moving on.

  • We note here that the SD card reader is now permanently attached to the main board—whereas on the old Switch, we had already removed it by this point.

  • Modularity is generally good for repair, so this is minor step backwards from our point of view.

  • Let's peek under the metal shield and get our first look at the internals in the visible light spectrum.

分解の道が、通行止め(トライポイント)ネジによってブロックされました。この特殊ツールを手に入れるまでは、先に進めません。

今日、邪魔するクエストは相手にしません。この分解は、私たちのミッションで、ゲームに勝つために、あらゆるツールを揃えています。Y00ドライバー、君に決めた!

バックカバーの下にあるものは…別のカバーです。進む。

ここで判明したことは、SDカードリーダーが永続的にメインボードに装着されています。従来モデルSwitchの分解では、この時点で既にSDカードリーダーを取り出していました

一般的に、モジュールは修理にとって利便性の高いものです。ということで、私たちの観点から、これは一歩後退です。

メタル製シールドの下に進んで、その内側を覗いてみましょう。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.