Ga door naar hoofdinhoud
Stap 18
Looking from the back, pull up the board, releasing from the pins of the main board. Finally you can remove the power switch. And this is the power source board.
  • Looking from the back, pull up the board, releasing from the pins of the main board.

  • Finally you can remove the power switch.

  • And this is the power source board.

  • When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.