Ga door naar hoofdinhoud
Stap 11
Remove the two screws with a Philips "0" screwdriver to deatach the controller port. Remove the two screws with a Philips "0" screwdriver to deatach the controller port. Remove the two screws with a Philips "0" screwdriver to deatach the controller port.
  • Remove the two screws with a Philips "0" screwdriver to deatach the controller port.

Quita estos dos tornillos para desconectar las ranuras de los mandos.

-[* red] Remove this two screws to deatach the controller port.
+[* red] Remove the two screws with a Philips "0" screwdriver to deatach the controller port.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.