Ga door naar hoofdinhoud
Stap 9
This model has a flat cable to the reset and eject button. Take extreme caution to not destroy it. Remove the button structure just pulling with a small Flathead screwdriver. Remove the button structure just pulling with a small Flathead screwdriver.
  • This model has a flat cable to the reset and eject button. Take extreme caution to not destroy it.

  • Remove the button structure just pulling with a small Flathead screwdriver.

Este modelo tiene un cable plano que va conectado al botón de reset y de levantar la tapa. Ten mucho cuidado de no romperlo o dañarlo.

Quita el plastico que sujeta el botón simplemente tirando con un destornillador plano pequeño.

[* icon_caution] This model has a flat cable to the reset and eject button. Take extreme caution to not destroy it.
[* red] Remove the button structure just pulling with a small flatFlathead screwdriver.
[* red] Remove the button structure just pulling with a small flatFlathead screwdriver.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.