Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 2
Apply a suction cup to the heated bottom edge of the back cover. Make sure you did not mistake the screen side for the back cover side. If your back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere.
  • Apply a suction cup to the heated bottom edge of the back cover.

  • Make sure you did not mistake the screen side for the back cover side.

  • If your back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere.

  • Lift on the suction cup with strong, steady force to create a gap.

  • Depending on how aged your phone is, this may take significant force. If you are having trouble, apply more heat and try again.

  • Insert an opening pick into the gap.

  • Don't use metal tools to pry, or you'll mar or shatter the glass back cover. If the panel won't budge, apply more heat, either with a hair dryer or heat gun.

Applica una ventosa al bordo inferiore riscaldato del retro del telefono.

Assicurati di non confondere lo schermo con il retro del telefono.

Se la cover posteriore è seriamente crepata, puoi coprirla con uno strato di nastro da pacchi trasparente per consentire alla ventosa di aderire.

Tira sulla ventosa con una forza elevata e costante per creare una fessura.

A seconda dell'età del tuo telefono, può essere richiesta una forza notevole. Se incontri dei problemi, applica dell'altro calore e riprova.

Inserisci un plettro di apertura nella fessura.

[* black] Apply a suction cup to the heated bottom edge of the back cover.
[* icon_caution] Make sure you did not mistake the screen side for the back cover side.
[* icon_note] If your back cover is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere.
[* black] Lift on the suction cup with strong, steady force to create a gap.
[* icon_note] Depending on how aged your phone is, this may take significant force. If you are having trouble, apply more heat and try again.
[* black] Insert an opening pick into the gap.
+ [* icon_caution] Don't use metal tools to pry, or you'll mar or shatter the glass back cover. If the panel won't budge, apply more heat, either with a hair dryer or heat gun.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.