Repareer je spullen Gemeenschap Winkel

How To Replace Custom-cut Adhesive For Samsung Phones

Terug naar de handleiding
Engels
Nederlands
Stap 14
How To Replace Custom-cut Adhesive For Samsung Phones: stap 0, afbeelding 1 van 3 How To Replace Custom-cut Adhesive For Samsung Phones: stap 0, afbeelding 2 van 3 How To Replace Custom-cut Adhesive For Samsung Phones: stap 0, afbeelding 3 van 3

  • The adhesive is very sticky—you normally have one chance to apply it properly, so be careful as you handle the adhesive.

  • Peel away the clear liner from the perimeter adhesive strip to expose the adhesive.

  • Hold the strip by its tabs and carefully line up a long edge of the adhesive to the edge of the back cover.

  • Set the adhesive onto the back cover and press it onto the cover with your fingers.

  • Peel away the colored liner from the perimeter adhesive strip to expose the adhesive.

  • Make sure the adhesive doesn't peek over the cover edge, or it won't properly seal the device.

  • At this point, the back cover is prepped for sealing. Be sure to test your phone's functionality before sealing the phone.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.