Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
Guide the wire to the second component It is easier to keep the wire in place if you cut part of the glue out in a line. That way you can insert the wire into the cutout to prevent it from moving Add some glue or UV resin to keep the wire in place.
Soldering (Part 2)
  • Guide the wire to the second component

  • It is easier to keep the wire in place if you cut part of the glue out in a line. That way you can insert the wire into the cutout to prevent it from moving

  • Add some glue or UV resin to keep the wire in place.

  • Solder the wire to the top end of the component.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.