Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
The LCD panel is held in place with eight T10 Torx screws. After the screws are free, pivoting the LCD assembly yields the first glimpse of the treasures that lie beneath. Before you can lift up the LCD, carefully disconnect the vertical sync cable from the logic board.
  • The LCD panel is held in place with eight T10 Torx screws.

  • After the screws are free, pivoting the LCD assembly yields the first glimpse of the treasures that lie beneath.

  • Before you can lift up the LCD, carefully disconnect the vertical sync cable from the logic board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.