Repareer je spullen Gemeenschap Winkel

Game Boyの分解

Terug naar de handleiding
Engels
Japans
Stap 6
Nintendo Game Boy Teardown: stap 0, afbeelding 1 van 3 Nintendo Game Boy Teardown: stap 0, afbeelding 2 van 3 Nintendo Game Boy Teardown: stap 0, afbeelding 3 van 3

  • The LCD display is attached to the circuit board with clips and a couple of screws. Unfortunately, the display's cable is soldered to the board, making display replacements a bit tricky.

  • The speaker, which is typically a modular component in many devices today, is also soldered to the board. Fortunately, it's just two wires with simple solder points.

LCDディスプレイは回路板にクリップと数本のネジで固定されています。残念なことに、ディスプレイのケーブルは基板に半田付けされています。

スピーカーに付けられた2本のワイヤも、回路板に半田付けされています。

-[* black] The LCD display is attached to the circuit board with clips and couple of screws. Unfortunately, the display's cable is soldered to the board.
-[* black] The speaker's two wires are also soldered to the circuit board.
+[* black] The LCD display is attached to the circuit board with clips and a couple of screws. Unfortunately, the display's cable is soldered to the board, making display replacements a bit tricky.
+[* black] The speaker, which is typically a modular component in many devices today, is also soldered to the board. Fortunately, it's just two wires with simple solder points.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.