Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Remove one Philips screw from the charging port assembly.
  • Remove one Philips screw from the charging port assembly.

  • The circuit board is held in by two clips: a plastic clip on the left side and a metal clip on the right side.

  • To remove the circuit board, insert a plastic opening pick between the circuit board and the plastic clip, and gently bend the center of the circuit board upwards to disengage it.

  • Using an opening pick, gently detach the weak adhesive underneath the circuit board and remove.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.