Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 2
In the following steps, you'll be cutting through the adhesive securing the back cover. The adhesive is laid out as seen in the first image, which shows the inside of the cover after it has been removed.
  • In the following steps, you'll be cutting through the adhesive securing the back cover.

  • The adhesive is laid out as seen in the first image, which shows the inside of the cover after it has been removed.

  • As seen from the outside of the phone, you'll be slicing through the adhesive in the highlighted areas.

  • The adhesive is the thinnest on the right side of the phone, just below the Bixby button.

在以下步骤中,你将切割固定后盖的粘合剂。

如第一张图所示布置粘合剂,其显示在盖子被移除后的内部。

从手机外部可以看出,你将在突出显示区域切割粘合剂。

最薄的粘合剂是在手机右侧,位于Bixby 按钮下方。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.