Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3
Secure a suction cup to the back cover, as close to the heated edge as possible, just under the Bixby button where the adhesive is thinnest. The suction cup will not make a good seal on the curved portion of the glass, so avoid putting it on the very edge.
  • Secure a suction cup to the back cover, as close to the heated edge as possible, just under the Bixby button where the adhesive is thinnest.

  • The suction cup will not make a good seal on the curved portion of the glass, so avoid putting it on the very edge.

  • If the phone's back cover is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

将吸盘固定在后盖上,尽可能靠近加热边缘,就在粘合剂最薄的 Bixby 按钮下方。

吸盘不能在玻璃的弯曲部分上形成良好的密封,因此请避免将其放在最边缘。

如果手机的后盖破裂,则吸盘可能不会粘住。尝试用强力胶带将其提起,或将吸盘加到适当位置并使其固化,以便继续操作。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.