Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 1 vertalen

Stap 1
Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.
  • Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.

  • Prepare an iOpener and heat the back of the phone along the right edge for about two minutes. This will help soften the adhesive securing the back cover.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.

打开手机会损坏其防水密封。在你继续操作之前准备好更换粘合剂,或者在不更换粘合剂的情况下重新组装手机时注意避免接触液体。

准备 iOpener 并沿右边缘加热手机背面约两分钟。这将有助于软化固定后盖的粘合剂。

你可能需要多次重新加热并重新应用iOpener 以使手机足够温暖。按照iOpener 说明操作以避免过热。

也可以使用吹风机,热风枪或热板,但要注意不要让手机过热 —— OLED显示屏和内部电池都易受热损坏。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.