Ga door naar hoofdinhoud
Engels
Nederlands

Stap 2 vertalen

Stap 2
Gently heat the top of the phone to soften the adhesive. Use a suction cup to lift the display and insert opening picks.
  • Gently heat the top of the phone to soften the adhesive. Use a suction cup to lift the display and insert opening picks.

  • Starting from the top, separate the display from the frame.

  • The display cable is attached to the bottom half the display.

  • There is a thin flexible plastic frame between the main phone frame and the glass. Check if the replacement part has this frame included.

  • For reassembly, B7000 adhesive is recommended over TESA adhesive tape due to the tight tolerances .

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.