Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Use an opening pick or metal jimmy to carefully peel up a corner of this section of copper tape. Slowly peel the entire piece of copper tape off of the frame, trying not to tear or kink it. Set aside and re-install after attaching new display.
  • Use an opening pick or metal jimmy to carefully peel up a corner of this section of copper tape.

  • Slowly peel the entire piece of copper tape off of the frame, trying not to tear or kink it. Set aside and re-install after attaching new display.

  • Using the pointy tip of a spudger, detach these display cable tabs from the frame.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.