Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 42 handleidingen die deze stap bevatten.

Stap 13
Leave the opening pick in the iPad slightly past the front-facing camera. Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive. Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.
  • Leave the opening pick in the iPad slightly past the front-facing camera.

  • Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.

  • Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

将刚才那片撬片稍微滑过前置摄像头然后放在原位不动。

拿另一片撬片插入到摄像头的左侧位置然后滑动到转角位置,完成对该边缘部分的粘合剂分离工作。

将第二片撬片放在转角处,防止粘合剂冷却后重新粘连。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.