Ga door naar hoofdinhoud

更换iPhone XS Max的电池

Stap 9
iPhone XS Max Battery Replacement: stap 0, afbeelding 1 van 3 iPhone XS Max Battery Replacement: stap 0, afbeelding 2 van 3 iPhone XS Max Battery Replacement: stap 0, afbeelding 3 van 3
  • Pull and remove the final adhesive strip.

  • The strip may fling the battery when it separates from the iPhone, so hold your hand over the battery to secure it—but don't press down on the battery itself, or the added pressure may cause the adhesive strip to break off underneath the battery.

  • If you removed all four adhesive strips successfully, skip the next step.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.

  • For an alternative method to unstick the battery from the case, continue with the next step below.

拉出,并揭下最后一块胶带。

当电池与iPhone分离时,可能会将电池弹出,所以握紧你的手来保护电池,但是注意不要按压电池本身,增加对电池的压力可能会导致电池下方的胶带断开。

如果你成功的移除了所有的四块胶带,则可以跳过下一步了!

如若在上述过程中有任何一块胶带在电池底下断裂,无法取出,就进行下一步。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.