Ga door naar hoofdinhoud
Stap 9
Remove these screws next and note the screws on the outside (right in this picture) are a little longer than the center screws. There are two sets of these on either side of center.  Use a Torx 5 driver Remove these screws next and note the screws on the outside (right in this picture) are a little longer than the center screws. There are two sets of these on either side of center.  Use a Torx 5 driver Remove these screws next and note the screws on the outside (right in this picture) are a little longer than the center screws. There are two sets of these on either side of center.  Use a Torx 5 driver
  • Remove these screws next and note the screws on the outside (right in this picture) are a little longer than the center screws. There are two sets of these on either side of center. Use a Torx 5 driver

Entferne diese Schrauben als nächstes und pass auf, denn die Schrauben auf der Außenseite (rechts im Bild) sind ein bisschen länger als die mittleren. Auf jeder Seite der Mitte befinden sich davon zwei Sets. Benutze dazu einen Torx T5 Schraubendreher.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.