Ga door naar hoofdinhoud
Stap 3
Start with removing the 4 corner screws and the two center screws from around the bottom panel. **NOTE the screws next to the hinge are a different length (longer) than the two at the other two corners, and the two center screws are the shortest. so keep that in mind when putting your MacBook back together. Start with removing the 4 corner screws and the two center screws from around the bottom panel. **NOTE the screws next to the hinge are a different length (longer) than the two at the other two corners, and the two center screws are the shortest. so keep that in mind when putting your MacBook back together. Start with removing the 4 corner screws and the two center screws from around the bottom panel. **NOTE the screws next to the hinge are a different length (longer) than the two at the other two corners, and the two center screws are the shortest. so keep that in mind when putting your MacBook back together.
  • Start with removing the 4 corner screws and the two center screws from around the bottom panel. **NOTE the screws next to the hinge are a different length (longer) than the two at the other two corners, and the two center screws are the shortest. so keep that in mind when putting your MacBook back together.

Beginne mit den vier Schrauben in den Ecken und den beiden Schrauben in der Mitte der Bodenplatte. ACHTUNG: die Schrauben nahe beim Scharnier sind länger als die beiden in den anderen Ecken, und die beiden Schrauben in der Mitte sind am kürzesten. Achte beim Zusammenbau auf die unterschiedlichen Schraubenlängen.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.