iPod Nano 4th Generation Click Wheel Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Engels

Koreaans

Stap 1 vertalen

Stap 1

Press down firmly around the perimeter of the click wheel to separate it from the adhesive securing it to the outer case.
This requires a good amount of force. Work slowly.
It may be helpful to use an edged tool to separate the adhesive from the click wheel on the inside of the Nano while pressing it down from the outside.
Remove the click wheel from the inside of the Nano.
Be careful not to let the click-wheel slide on the metal plate supporting it, as it will break the flat cable. Apply force perpendicular to the click-wheel.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.