Ga door naar hoofdinhoud
Stap 3
Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver. Remove the 6.4 mm Phillips #1 screws on each side of the device. Remove the 6.4 mm Phillips #1 screws on each side of the device.
  • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

  • Remove the 6.4 mm Phillips #1 screws on each side of the device.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.