Ga door naar hoofdinhoud
Stap 4
You will need a Phillips screwdriver and spudger for this step.
  • You will need a Phillips screwdriver and spudger for this step.

  • Remove the center screw near the battery slot.

  • Open the lid of the laptop and set it on its side. Insert a spudger into the same hole the screw was removed from.

  • Push the spudger inward until the keyboard is disengaged. Once disengaged, flip the laptop upright.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.