Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Using a Philips #00 Screwdriver, remove the seven 3 mm long screws from the perimeter of the battery. Each screw is labeled "M2X4" with an arrow pointing to the screw.
  • Using a Philips #00 Screwdriver, remove the seven 3 mm long screws from the perimeter of the battery.

  • Each screw is labeled "M2X4" with an arrow pointing to the screw.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.