Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Using a Philips #00 Screwdriver, remove the seven 3 mm long screws from the perimeter of the battery. Each screw is labeled "M2X4" with an arrow pointing to the screw.
  • Using a Philips #00 Screwdriver, remove the seven 3 mm long screws from the perimeter of the battery.

  • Each screw is labeled "M2X4" with an arrow pointing to the screw.

Con un cacciavite a croce Phillips #00, rimuovi le sette viti lunghe 3 mm dal perimetro della batteria.

Ciascuna vite è etichettata "M2X4" con una freccia che indica la vite stessa.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.