Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Using a Philips #00 Screwdriver, remove the seven 3 mm long screws from the perimeter of the battery. Each screw is labeled "M2X4" with an arrow pointing to the screw.
  • Using a Philips #00 Screwdriver, remove the seven 3 mm long screws from the perimeter of the battery.

  • Each screw is labeled "M2X4" with an arrow pointing to the screw.

Usa un destornillador Phillips #0, remueve los siete tornillos de 3 mm del perímetro de la batería.

Cada tornillo está etiquetado "M2X4" con una flecha apuntando al tornillo.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.