Ga door naar hoofdinhoud

Sostituzione scheda dei controlli JBL Flip 4

Stap 3
JBL Flip 4 Controls Board Replacement: stap 0, afbeelding 1 van 2 JBL Flip 4 Controls Board Replacement: stap 0, afbeelding 2 van 2
  • Pry up the button control board by inserting the metal spudger underneath both sides of the board.

  • Try not to damage the green control board while using the metal tools.

  • The control board is glued down as well, so you will need to use some force.

Solleva la scheda dei controlli infilando sotto entrambi i lati uno spudger in metallo.

Cerca di non danneggiare la scheda dei controlli verde mentre usi degli strumenti in metallo.

Anche la scheda dei controlli è incollata, quindi dovrai fare della forza.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.