Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Contains small springs and ball bearings. We suggest working over a plate or tray. Hold the watch firmly in one hand, face up. Place the iFixit Opening Tool under the bezel ring and use prying  motion to remove.
  • Contains small springs and ball bearings. We suggest working over a plate or tray.

  • Hold the watch firmly in one hand, face up.

  • Place the iFixit Opening Tool under the bezel ring and use prying motion to remove.

  • The plastic retainer is manufactured with an open gap, you did not break it.

  • For reassembly, set the plastic retainer in the ring, then press the ring down until it snaps in place.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.