Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Use the 1/2" socket to loosen and remove the four bolts and washers on the spark plug cover labeled 2.4L Twin Cam. These four bolts should be torqued to 18 ft-lbs when putting the spark plug cover back on. These four bolts should be torqued to 18 ft-lbs when putting the spark plug cover back on.
  • Use the 1/2" socket to loosen and remove the four bolts and washers on the spark plug cover labeled 2.4L Twin Cam.

  • These four bolts should be torqued to 18 ft-lbs when putting the spark plug cover back on.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.