Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
If you are replacing the frame (e.g. in a display assembly with frame guide) you can skip this step since your new part should be clean. Scrape off the old thermal pads with an opening tool or a spudger. If you want to go the extra mile you can clean the rest with a Q-tip and some isopropyl alcohol (>97%).
cleaning the frame
  • If you are replacing the frame (e.g. in a display assembly with frame guide) you can skip this step since your new part should be clean.

  • Scrape off the old thermal pads with an opening tool or a spudger.

  • If you want to go the extra mile you can clean the rest with a Q-tip and some isopropyl alcohol (>97%).

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.