Ga door naar hoofdinhoud

Applicazione nastro sul display

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 14 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Taping Over The Display, Tape over any cracks: stap 0, afbeelding 1 van 3 Taping Over The Display, Tape over any cracks: stap 0, afbeelding 2 van 3 Taping Over The Display, Tape over any cracks: stap 0, afbeelding 3 van 3
Tape over any cracks
  • If your iPhone has a cracked screen, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of packing tape over the iPhone's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

  • If the broken glass makes it difficult to get a suction cup to stick in the next few steps, try folding a strong piece of tape (such as duct tape) into a handle and lifting the display with that instead.

Se il tuo iPhone ha lo schermo in pezzi, applicando del nastro adesivo sulla superficie eviterai ulteriori rotture e la possibilità di farti male nel corso della riparazione.

Disponi strisce sovrapposte di nastro da pacchi sul display dell'iPhone fino a ricoprire tutta la superficie.

In questo modo impedirai la dispersione di schegge di vetro e assicurerai l'integrità strutturale del display quando lo forzerai per sollevarlo.

Indossa occhiali di sicurezza per proteggere gli occhi da schegge di vetro che potrebbero volare via nel corso della riparazione.

Se la rottura del vetro rende difficile far aderire una ventosa come indicato nei prossimi passi, prova a ripiegare un pezzo di nastro adesivo molto tenace (come il nastro americano) attorno a una maniglia e usalo al posto della ventosa per sollevare il display.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.