Ga door naar hoofdinhoud

Recouvrir l'écran d’adhésif

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 14 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Taping Over The Display, Tape over any cracks: stap 0, afbeelding 1 van 3 Taping Over The Display, Tape over any cracks: stap 0, afbeelding 2 van 3 Taping Over The Display, Tape over any cracks: stap 0, afbeelding 3 van 3
Tape over any cracks
  • If your iPhone has a cracked screen, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of packing tape over the iPhone's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

  • If the broken glass makes it difficult to get a suction cup to stick in the next few steps, try folding a strong piece of tape (such as duct tape) into a handle and lifting the display with that instead.

Si votre écran iPhone est fissuré, n'oubliez pas de le sécuriser de manière à éviter d'aggraver la fissure ou de vous blesser durant la réparation.

Posez des bandes de ruban adhésif d'emballage sur l'écran iPhone en les faisant se chevaucher jusqu'à ce que la surface soit complètement recouverte.

Ainsi, les éclats de verre seront fixés et vous pourrez faire levier correctement et retirer l'écran d'un bloc.

Portez des lunettes de sécurité pour parer aux éventuels bris de verre projetés pendant la réparation.

Si vous avez du mal à retirer la vitre cassée avec une ventouse au cours des prochaines étapes, utilisez un morceau de bande adhésive solide (par exemple du ruban adhésif isolant) plié en deux pour fabriquer une poignée et soulever l'écran.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.