Ga door naar hoofdinhoud

Logitech MX Master reinigen

Stap 9
Cleaning Logitech MX Master, Scroll Wheel: stap 0, afbeelding 1 van 3 Cleaning Logitech MX Master, Scroll Wheel: stap 0, afbeelding 2 van 3 Cleaning Logitech MX Master, Scroll Wheel: stap 0, afbeelding 3 van 3
Scroll Wheel
  • I couldn't get the wheel out of the assembly, but I was able to spin it with some compressed air. I didn't get it on video, but a big chunk of dust came flying out.

  • I apologize in advance for filming in portrait mode. Also, I failed to get a shot of the debris inside the wheel.

  • That spring on the bottom in the first picture will probably fall off. Make sure to keep track of it.

  • I took the assembly apart in an effort to get the wheel out - no dice. I don't know where this oddly shaped spring goes, possibly on this peg, but I left it out and it doesn't seem to be important.

Ich konnte das Rad nicht aus der Baugruppe herausholen, aber ich konnte es mit etwas Druckluft drehen und so teilweise reinigen.

Ich entschuldige mich im Voraus dafür, dass ich im Porträtmodus gefilmt habe. Außerdem ist es mir nicht gelungen, eine Aufnahme von den Rückständen im Inneren des Rades zu machen.

Die Feder unten auf dem ersten Bild wird wahrscheinlich bei der Prozedur abfallen. Achte darauf, sie nicht zu verlieren.

Ich habe die Baugruppe auseinandergenommen, um das Rad herauszuholen - ohne Würfel. Ich weiß nicht, wo diese seltsam geformte Feder hinkommt, möglicherweise an diesen Zapfen, aber ich habe sie ausgelassen, und sie scheint nicht wichtig zu sein. Anmerkung: Bitte kommentiere, sofern du weißt wo sie hinkommt!

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.