Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 15
Double-check the fit and alignment of your new battery before sticking it down. On earlier models, be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board. If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.
  • Double-check the fit and alignment of your new battery before sticking it down.

  • On earlier models, be mindful of the battery data cable and make sure it doesn't get pinched or trapped under the battery board.

  • If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.

  • Carefully position the battery and set it into place.

  • Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.

Controlla con cura l'allineamento della nuova batteria prima di attaccarla.

Sui primi modelli del MacBook Pro, stai attento al cavo dati della batteria e accertati che non sia pinzato o intrappolato sotto la scheda della batteria.

Se la tua batteria è dotata di adesivo preinstallato nella parte inferiore, rovesciala e stacca con attenzione la protezione per esporre l'adesivo. In caso contrario, per bloccare in posizione la batteria applica un sottile nastro biadesivo come il Tesa 61395.

Posiziona con cura la batteria e disponila in posizione.

Premi e tieni premuta con fermezza ogni cella per 5-10 secondi per fissarla bene al case inferiore.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.