Ga door naar hoofdinhoud
Engels
Nederlands
Stap 10
A series of screws and tightly wrapped antenna cables secure the rear I/O panel shield to the logic board. A few twists of our precision aluminum driver with a T6 Torx bit and some cable de-routing is all it takes to remove the shield. A few twists of our precision aluminum driver with a T6 Torx bit and some cable de-routing is all it takes to remove the shield.
  • A series of screws and tightly wrapped antenna cables secure the rear I/O panel shield to the logic board.

  • A few twists of our precision aluminum driver with a T6 Torx bit and some cable de-routing is all it takes to remove the shield.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.