Ga door naar hoofdinhoud
Stap 6
When finished scrubbing the bearing, rinse it in FRESH cleaning solution until there is no dirt or old lubricant in the bearings.  Then set this bearing aside. Repeat steps 4 - 7 for your remaining seven bearings.  Be sure to continue to refresh your rinsing solution if it becomes too dirty. Repeat steps 4 - 7 for your remaining seven bearings.  Be sure to continue to refresh your rinsing solution if it becomes too dirty.
  • When finished scrubbing the bearing, rinse it in FRESH cleaning solution until there is no dirt or old lubricant in the bearings. Then set this bearing aside.

  • Repeat steps 4 - 7 for your remaining seven bearings. Be sure to continue to refresh your rinsing solution if it becomes too dirty.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.