Ga door naar hoofdinhoud
Stap 5
After submerging the bearing, remove it from the cleaning solution and begin to scrub off any dirt or grease with a toothbrush. You may also scrub the shield that you removed so that it can be cleaned as well.
  • After submerging the bearing, remove it from the cleaning solution and begin to scrub off any dirt or grease with a toothbrush.

  • You may also scrub the shield that you removed so that it can be cleaned as well.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.