Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
With a 13mm wrench, remove the axle nut located in the center of the wheel.
The skate board fix up
  • With a 13mm wrench, remove the axle nut located in the center of the wheel.

  • Set the axle nut aside, and remove the wheel.

Drehe die Achsmutter mit einem 13 mm Schlüssel heraus.

Lege die Achsmutter zur Seite und hole das Rad heraus.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.