Ga door naar hoofdinhoud

Retina MacBook 2016 Opening Lower Case Assembly

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 25 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 11
Retina MacBook 2016 Opening Lower Case Assembly: stap 0, afbeelding 1 van 3 Retina MacBook 2016 Opening Lower Case Assembly: stap 0, afbeelding 2 van 3 Retina MacBook 2016 Opening Lower Case Assembly: stap 0, afbeelding 3 van 3
  • Carefully close the MacBook and flip it over once again, so that the Apple logo faces up.

  • Lifting from the front edge, raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.

  • Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.

  • It's possible to open the MacBook all the way and lay both sides down flat, but this may damage the flex cables and is not recommended.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.