Ga door naar hoofdinhoud

iPhone 5 Vervanging van het scherm

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 22 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 4
iPhone 5 Screen Replacement, Anti-Clamp instructions: stap 0, afbeelding 1 van 3 iPhone 5 Screen Replacement, Anti-Clamp instructions: stap 0, afbeelding 2 van 3 iPhone 5 Screen Replacement, Anti-Clamp instructions: stap 0, afbeelding 3 van 3
Anti-Clamp instructions
  • The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down two steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over either the left or right edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.

De volgende twee stappen introduceren de anti-klem, een handige tool die de openingsprocedure vergemakkelijkt. Als je de anti-klem niet gebruikt, sla dan de volgende twee stappen over voor een alternatieve methode.

Voor uitgebreider instructies voor het gebruik van de Anti-Klem, lees je deze handleiding door.

Trek de blauwe hendel naar achteren om de armen te ontgrendelen.

Schuif de armen over de linker- of rechterzijde van je iPhone.

Plaats de zuignappen dichtbij de onderkant van de telefoon—één op de voorkant en één aan de achterkant.

Druk beide zuignappen aan, om zuigkracht uit te oefenen op de gewenste plek.

Als het oppervlak waarop de zuignappen zich moeten vastzuigen te glad is, kun je wat tape gebruiken voor meer grip.

[title] Anti-Clamp instructions
-[* icon_note] The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down two steps for an alternate method.***
+[* icon_note] The next two steps demonstrate the [product|IF145-513|Anti-Clamp], a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down two steps for an alternate method.***
[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true].
[* black] Pull the blue handle backwards to unlock the Anti-Clamp's arms.
[* black] Slide the arms over either the left or right edge of your iPhone.
[* black] Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.
[* black] Squeeze the cups together to apply suction to the desired area.
[* icon_note] If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can [guide|159595|use tape|new_window=true] to create a grippier surface.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.