Ga door naar hoofdinhoud
Engels
Nederlands

Stap 2 vertalen

Stap 2
Remove the two T6 Torx screws securing the IR board to its bracket on the logic board. After removing these screws the IR board is completely free from the logic board and may fall.
  • Remove the two T6 Torx screws securing the IR board to its bracket on the logic board.

  • After removing these screws the IR board is completely free from the logic board and may fall.

  • Remove the IR board from your iMac.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.