Ga door naar hoofdinhoud

Cómo reparar Sony MDR-ZX100

Stap 5 vertalen

Stap 5
How to repair  Sony MDR-ZX100: stap 0, afbeelding 1 van 2 How to repair  Sony MDR-ZX100: stap 0, afbeelding 2 van 2
  • Here are the two wires soldered back onto the circuit board. Test the headphones before assembling, this will ensure the soldering was cone right.

  • Reassemble in reversed order. :-) this is a quick and fun project. Nice little set of headphones, no cost to repair other than 15minutes of your time.

Aquí están los dos cables soldados en la placa de circuito. Prueba los auriculares antes de ensamblarlos, esto asegurará que la soldadura sea correcta.

Vuelve a montar en orden inverso. :-) este es un proyecto rápido y divertido. Bonito y pequeño juego de auriculares, sin costo de reparación más que 15 minutos de su tiempo.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.