Ga door naar hoofdinhoud

iPhone 5のLightningコネクターとヘッドホンジャックの交換

Stap 1 vertalen

Stap 1
iPhone 5 Lightning Connector and Headphone Jack Replacement: stap 0, afbeelding 1 van 1
  • Remove the following screws securing the Lightning connector assembly to the rear case:

  • One 2.9 mm Phillips screw

  • During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.

  • One 1.5 mm Phillips screw

  • Two 3.3 mm Phillips screws

Lightningコネクターアセンブリをリアケースに固定している次のネジを外します。

2.9mm プラスネジー1本

再組み立ての際は、ヘッドホンジャックのプラスチックの突起がメタル製ワッシャーの上にあることを確認してください。

1.5mm プラスネジー1本

3.3mm プラスネジー2本

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.