Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 11 handleidingen die deze stap bevatten.

Stap 7
Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board. The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.
  • Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board.

  • The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.

Usa la parte piatta di uno spudger per fare leva delicatamente sulla copertura del cavo dello schermo per sollevarla dalla scheda madre.

Il connettore del cavo dello schermo è incollato al retro della copertura, quindi non spingere lo spudger troppo a fondo sotto la copertura, o potresti danneggiare il connettore.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.