Ga door naar hoofdinhoud
Engels
Nederlands
Stap 4
Before soldering the black wire onto the motor clean your soldering iron. Do this by tinning it a little bit as you see in pic 1 then wipe it off on the damp sponge. After tinning your soldering iron you want to tin your wire to make sure the threads won't fall apart as shown in pic 2.
Step 4
  • Before soldering the black wire onto the motor clean your soldering iron. Do this by tinning it a little bit as you see in pic 1 then wipe it off on the damp sponge.

  • After tinning your soldering iron you want to tin your wire to make sure the threads won't fall apart as shown in pic 2.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.